10153968 | EAM360R-K - analog - MAGRES - фото 1 - id-p104659037

Характеристики и описание

electrical ratings
Voltage supply	8...30 VDC 14...30 VDC
Reverse polarity protection	Yes
Consumption typ.	20 mA (24 VDC, w/o load)
Initializing time	≤170 ms after power on
Response time	< 1 ms
Interface	Analog 0...10 Или отправьте нам запрос на / Resolution: 12 bit
Function	Analog 0...10 Или отправьте нам запрос на / Resolution: 12 bitMultiturn Singleturn
Teach range	Analog 0...10 Или отправьте нам запрос на / Resolution: 12 bitMultiturn Singleturn5°...359.9° (singleturn) 5°...32767 turns (multiturn)
Absolute accuracy	Analog 0...10 Или отправьте нам запрос на / Resolution: 12 bitMultiturn Singleturn5°...359.9° (singleturn) 5°...32767 turns (multiturn)±0,15 ° (+20 ±15 °C) ±0,25 ° (-40...+85 °C) sensor (see info working distance)
Accuracy analog output	±0.5 % of whole measuring range (-40...+85 °C)
Sensing method	Magnetic
Interference immunity	MagneticDIN EN 61000-6-2 ISO 11452-2:2004* / -5:2002* ISO 7637-2:2004* ISO 10605:2008 + Amd 1:2014 (CD ±8 kV / AD ±15 kV) * Severity level according to ECE R10 (Rev. 4)
Emitted interference	MagneticDIN EN 61000-6-2 ISO 11452-2:2004* / -5:2002* ISO 7637-2:2004* ISO 10605:2008 + Amd 1:2014 (CD ±8 kV / AD ±15 kV) * Severity level according to ECE R10 (Rev. 4)DIN EN 61000-6-4 CISPR 25:2008 (30..1000 MHz) ISO 7637-2:2004* * Severity level according to ECE R10 (Rev. 4)
Programmable parameters	Measuring range teachable
Diagnostic function	DATAVALID
Factory setting	360° and 10 revolutions (other on request)
mechanical design
Size (flange)	ø36 mm
Shaft type	ø36 mmø6 mm (magnet bore) ø8 mm (magnet bore) ø12 mm (magnet bore)
Protection DIN EN 60529	IP 67
Operating speed	≤6000 rpm
Working distance	1,1 ±0.9 mm axial / ≤0.3 mm eccentricity
Material	1,1 ±0.9 mm axial / ≤0.3 mm eccentricity Housing: steel, powder-coated Flange: aluminium
Corrosion protection	1,1 ±0.9 mm axial / ≤0.3 mm eccentricity Housing: steel, powder-coated Flange: aluminiumIEC 60068-2-52 Salt mist for ambient conditions C5-M (CX) according to ISO 12944-2
Operating temperature	-40...+85 °C (see general information)
Relative humidity	95 %
Resistance	95 %DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 500 g, 1 ms
Weight approx.	170 g
Connection	170 gFlange connector M12, 5-pin Cable 2 m
Instruction	Use in safety functions exclusively based on Application Note and MTTFd reliability prediction (request separately).